Views:0 Author:Site Editor Publish Time: 2021-06-07 Origin:Site
The introduction of the led outside flood lights :
Floodlights are not spotlights, projectiles, or spotlights. Floodlight made is highly diffuse, without direction rather than a clear outline of beam of light, creating soft and transparent, the shadow of the objects used in lighting, lighting of weakening is much slower than when using a spot light, even some of floodlight lighting decreased very slowly, looks like a light source does not produce the shadows. Spotlights, on the other hand, project directed, well-defined beams of light to illuminate a specific area.
Led outside flood lights of the materials :
Lamp body material surface treatment for aluminum alloy die-casting molding electrostatic spraying, high temperature resistant, acid and alkali resistant, aging resistant coating the lamp body USES light electrical integration design, compact structure, small volume application imported high purity aluminum reflector, a variety of reflective surface design, form various requirements of light distribution, high light efficiency, small light glare can according to customer requirements, Can use single-ended or double-ended metal halide lamp or high-pressure sodium lamp cap using E40 or RX7S mask for 5mm toughened glass, safety, high temperature resistance, high strength, good light transmittance sealing strip for anti-corrosion silicone rubber seal, good sealing, waterproof, dustproof application of high-performance inductor ballast, trigger and capacitor, Ensure that the electrical performance of the lamp meets the requirements of the national standard. The internal connection is 1mm2PVC. It is suitable for markers, stadiums, squares, trees, billboards, parking lots, exterior walls of buildings, etc.
The characteristics of the led outside flood lights :
Floodlight, as the replacement of electric light source, has been recognized by more and more people and has been applied in many fields. Its main features are as follows:
1. ife long: ordinary incandescent lamps, fluorescent lamps, energy-saving lamps, and other gas discharge lamps have filament or electrode, and the sputtering effect of filament or electrode is just the inevitable component that limits the service life of the lamp. High frequency electrodeless discharge lamps require little or no maintenance and have high reliability. Service life up to 60,000 hours (calculated by 10 hours per day, life can reach more than 10 years). Compared with other lamps: 60 times of incandescent lamps; 12 times more than energy-saving lamps; 12 times the size of a fluorescent lamp; 20 times that of a high-pressure mercury lamp; The long life of the floodlight greatly reduces the maintenance trouble and the number of replacement times, saves the cost of materials and labor, and ensures the long-term normal use. Because floodlights have no electrodes, they emit light by combining the principle of electromagnetic induction with the principle of fluorescent discharge, so there is no necessary component that limits their lifetime. The service life is only determined by the quality grade of electronic components, circuit design and the manufacturing process of the bubble body, the general service life can reach 60,000 ~ 100,000 hours.
2, energy saving: compared with incandescent lamp, energy saving up to about 75%, 85W floodlight light flux and 500W incandescent lamp light flux is roughly equal.
3, environmental protection: it uses solid mercury agent, even if broken will not cause pollution to the environment, more than 99% recovery, is a real environmental protection green light source.
4, no stroboscopic: because of its high working frequency, it is regarded as "no stroboscopic effect", which will not cause eye fatigue and protect eye health.
5. Good color rendering: the color rendering index is greater than 80, the light color is soft, presenting the natural color of the illuminated object.
The application of the led outside flood lights :
Shining the object uniformly in all directions is the best way to simulate a light bulb or candle.
Main application scope: billboard, highway, railway tunnel, bridge and culvert, square, building, etc
Omni: An omni lamp is a point light that shines evenly in all directions. The range of its light can be adjusted arbitrarily, and it casts shadows on objects. Floodlights are the most widely used light source in renderings. The "standard floodlights" are used to illuminate the whole scene without any specific area. Multiple floodlights can be used in the scene to achieve a better effect. Be careful not to build too many floodlights, or the renderings will look dull and dull. Therefore, in the production of renderings at ordinary times, we should pay more attention to the influence of lighting parameters and layout on the light sense of the whole renderings scene, accumulate more experience and master the skills of lighting collocation.
LED floodlight is a point light source that can be irradiated uniformly in all directions. Its irradiation range can be adjusted arbitrarily, and it is shown as a regular octahedron icon in the scene. Floodlights are the most widely used source of light in rendering. Standard floodlights are used to illuminate the whole scene. Multiple floodlights can be used in a scene to produce better results. Floodlights are one of the most widely used light sources in renderings. Multiple floodlights can be used in a scene to achieve a better effect. To illuminate an object uniformly in all directions from a particular point.